TROY Group Bluetooth Print Adapter Manual do Utilizador descarregar pdf (Página 25)

4-1

Using the

Serial Port

The WindConnect has an RS-232 serial port that can be used to connect a console

terminal, a serial printer, or a wide variety of other RS-232-compatible devices. The

connector is an RJ45 modular jack similar to the type used on Ethernet networks

(but not electrically compatible). The pinouts of this connector are as follows:

RJ45 DTE DCE

pin Signal Signal pin pin

1RTS out CTS in 5 4

2 DTR out DSR in 6 20

3 Transmit Data Receive Data 3 2

4 Transmit return Signal Ground 7 7

5 Receive Return Signal Ground 7 7

6 Receive Data Transmit Data 2 3

7 DSR in DTR out 20 6

8 CTS in RTS out 4 5

In most cases, you will need an adapter cable in order to use the serial port. TROY

offers the SCABLE-DB25M 25-pin male adapter cable kit for easy connection to

most serial printers. To assemble this kit, connect the wires to the DB25 connector

pins as follows:

Pin 2: Black Pin 3: Yellow Pin 4: Blue

Pin 5: White Pin 6: Brown Pin 7: Green

Pin 20: Orange (Red is not used)

TROY also offers the SCABLE-DB9F 9-pin female adapter cable kit for connection

to the serial port on most PCs and laptops. To assemble this kit, connect the wires to

the DB9 connector pins as follows:

Pin 2: Yellow Pin 3: Black Pin 4: Orange

Pin 5: Green Pin 6: Brown Pin 7: Blue

Pin 8: White (Red is not used)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Sem comentários

TROY Group Bluetooth Print Adapter Manual do Utilizador Página 25